I used to enjoy these so much as a kid..... They are still pretty fucking good.
Space 1999, Thunderbirds, and UFO and perhaps one or two others...
I makes me think though.... getting away from sci-fi, with most meteor impacts by count - pulling the numbers out of my arse - there are 100 trillion billion specs of space dust hitting the moon every day, and then there are fairly rare unsurvivable impacts of say 10 Km wide and 3 Km deep......
But for the most part, deep underground bases - say 1Km sub surface, widely separated, with surface solar concentrator dishes generating 100Kw every 100 Km apart around the circumference of the moon.....
What is the diameter of a solar concentrator dish that with a 90% reflectivity, that will gather and focus, 100 Kw, on the moons equator?
- **No atmospheric attenuation:** ~36% more solar energy than Earth's surface (1,361 vs. 1,000 W/m²). - **No weather/clouds:** 100% uptime during lunar day (≈14 Earth days). - **No wind loading:** Lighter dish structure possible.
### **Challenges:**
- **Extreme temperature swings:** -173 °C to +127 °C; materials must withstand thermal cycling. - **Lunar dust (regolith):** Abrasive, electrostatically charged; will coat mirrors and reduce reflectivity.***************************** - **Two-axis tracking still required:** Sun moves slowly across lunar sky (360° per Earth month).
**Bottom line:** A **10.2 m dish** on the Moon delivers the same 100 kW that requires a **12 m dish** on Earth.
-------------------------------------------
How do you electrically repell lunar dust?
**Lunar Dust Repulsion via Electrostatic Methods**
Lunar dust is electrostatically charged by solar UV radiation and plasma, causing it to adhere to surfaces. Electrical repulsion systems actively counteract this:
### **1. Electrodynamic Shield (EDS) – Most Promising** - **Principle:** Apply **high-frequency AC voltage (1–10 kV, 0.1–10 kHz)** to a transparent conductive grid or film on surfaces (e.g., solar panels, visors). - **Effect:** Creates a **time-varying electric field** that continuously repels dust particles (both positive and negative charges) through dielectrophoretic forces. - **Power consumption:** ~5–10 W/m² - **Status:** NASA prototype tested in vacuum chambers; not yet flight-proven
### **2. Active Electrostatic Dust Repeller** - **Principle:** Maintain a **static high-voltage DC bias (>1 kV)** on surface electrodes, generating a **Coulomb barrier** that repels like-charged dust. - **Limitation:** Only repels particles of **one polarity**; ineffective against neutral or oppositely charged dust .
### **3. UV-Photoelectric Neutralization** - **Principle:** Use **UV lamps** to generate photoelectrons, neutralizing dust charge before it lands. - **Effectiveness:** Works in shadowed regions where solar UV is absent; complements EDS .
### **Practical Challenges:** - **Power consumption:** Continuous voltage requires ~50–100 W for a 10 m dish. - **Durability:** Electrodes degrade under **micrometeorite bombardment** and thermal cycling. - **Edge effects:** Dust accumulates at field boundaries.
**Bottom line:** **Electrodynamic shielding** is the leading method, but remains experimental. Passive mitigation (dust shields, angled surfaces) is still primary.
00
Laat meer zien
Commentaar bewerken
Super Chat Donation
The maximum you can super chat is . To super chat more, add more funds to your wallet. Donate $10 or more and get Freemium for a month!
Log in to comment
Ahhh the old Man Eating Monster episode..... I remembered the beastie..... but had forgotten the rest of it.
Been thinking about this monster the last few days.
I used to enjoy these so much as a kid..... They are still pretty fucking good.
Space 1999, Thunderbirds, and UFO and perhaps one or two others...
I makes me think though.... getting away from sci-fi, with most meteor impacts by count - pulling the numbers out of my arse - there are 100 trillion billion specs of space dust hitting the moon every day, and then there are fairly rare unsurvivable impacts of say 10 Km wide and 3 Km deep......
But for the most part, deep underground bases - say 1Km sub surface, widely separated, with surface solar concentrator dishes generating 100Kw every 100 Km apart around the circumference of the moon.....
What is the diameter of a solar concentrator dish that with a 90% reflectivity, that will gather and focus, 100 Kw, on the moons equator?
**Solar Concentrator Dish Diameter for 100 kW @ 90% Reflectivity – Moon's Equator**
### Calculation:
| Parameter | Value | Notes |
|-----------|-------|-------|
| **Target Power** | 100 kW (100,000 W) | At focal point |
| **Lunar Solar Irradiance** | **1,361 W/m²** | Solar constant at Moon's distance; no atmosphere |
| **Reflectivity** | 90% (0.90) | Modern glass/aluminum mirrors |
**Formula:**
Diameter = 2 × √[Power / (Irradiance × Reflectivity × π)]
**Plug-in:**
Diameter = 2 × √[100,000 / (1,361 × 0.90 × 3.1416)]
= 2 × √(100,000 / 3,847.6)
= 2 × √25.99
= 2 × 5.10
### **Answer: ~10.2 meters (≈33.5 feet) diameter**
---
### **Advantages on the Moon:**
- **No atmospheric attenuation:** ~36% more solar energy than Earth's surface (1,361 vs. 1,000 W/m²).
- **No weather/clouds:** 100% uptime during lunar day (≈14 Earth days).
- **No wind loading:** Lighter dish structure possible.
### **Challenges:**
- **Extreme temperature swings:** -173 °C to +127 °C; materials must withstand thermal cycling.
- **Lunar dust (regolith):** Abrasive, electrostatically charged; will coat mirrors and reduce reflectivity.*****************************
- **Two-axis tracking still required:** Sun moves slowly across lunar sky (360° per Earth month).
**Bottom line:** A **10.2 m dish** on the Moon delivers the same 100 kW that requires a **12 m dish** on Earth.
-------------------------------------------
How do you electrically repell lunar dust?
**Lunar Dust Repulsion via Electrostatic Methods**
Lunar dust is electrostatically charged by solar UV radiation and plasma, causing it to adhere to surfaces. Electrical repulsion systems actively counteract this:
### **1. Electrodynamic Shield (EDS) – Most Promising**
- **Principle:** Apply **high-frequency AC voltage (1–10 kV, 0.1–10 kHz)** to a transparent conductive grid or film on surfaces (e.g., solar panels, visors).
- **Effect:** Creates a **time-varying electric field** that continuously repels dust particles (both positive and negative charges) through dielectrophoretic forces.
- **Power consumption:** ~5–10 W/m²
- **Status:** NASA prototype tested in vacuum chambers; not yet flight-proven
### **2. Active Electrostatic Dust Repeller**
- **Principle:** Maintain a **static high-voltage DC bias (>1 kV)** on surface electrodes, generating a **Coulomb barrier** that repels like-charged dust.
- **Limitation:** Only repels particles of **one polarity**; ineffective against neutral or oppositely charged dust .
### **3. UV-Photoelectric Neutralization**
- **Principle:** Use **UV lamps** to generate photoelectrons, neutralizing dust charge before it lands.
- **Effectiveness:** Works in shadowed regions where solar UV is absent; complements EDS .
### **Practical Challenges:**
- **Power consumption:** Continuous voltage requires ~50–100 W for a 10 m dish.
- **Durability:** Electrodes degrade under **micrometeorite bombardment** and thermal cycling.
- **Edge effects:** Dust accumulates at field boundaries.
**Bottom line:** **Electrodynamic shielding** is the leading method, but remains experimental. Passive mitigation (dust shields, angled surfaces) is still primary.