Responsive image

Hasta la próxima


Samsung A01 - ID SIM card slots

24 vistas
Publicado en 23 Oct 2022 / En Cine y Animación

⁣Thanks to the retarded cunts in the Samsung design dept., and a lack of instructions in the manual - the Samsung A01 is a veritable cunt to figure out which SIM card slot is one or two, the print on the tray is super fine and very very faint.

They could have also made the mechanical switch to open to slot, that takes the Micro SD and SIM cards, with a slightly recessed button big enough to use a match stick or a bamboo skewer on, instead of a small paper clip diameter wire or similar, that has to poke inside the body.

You should not need "odd" tools to disassemble almost anything.

My only choice at this time was a levelled and squared off (blunted) insulin syringe.

Other than this, it's a good basic smart phone.

Mostrar más
Responsive image

Log in to comment

Life_N_Times_of_Shane_T_Hanson

Thanks to the retarded cunts in the Samsung design dept., and a lack of instructions in the manual - the Samsung A01 is a veritable cunt to figure out which SIM card slot is one or two, the print on the tray is super fine and very very faint.

They could have also made the mechanical switch to open to slot, that takes the Micro SD and SIM cards, with a slightly recessed button, big enough to use a match stick, a tooth pick or a bamboo skewer on, instead of a small paper clip diameter wire or similar, that has to poke inside the body.

You know - the dumb cunts should be kicked for showing a lack of common sense.

The original tool is very, very, tiny and easily lost....

You should not need "odd" tools to disassemble almost anything.

My only choice at this time was a leveled off (blunted) insulin syringe.

[] not V

Some fine enough grinding medium of sorts - from carborundum paper to cement paving...

Other than this, it's a good basic smart phone.

   0    0
Mostrar más

0

Hasta la próxima